Parker Kittiwake has launched its X-Ray Fluorescence (XRF) Analyser, a portable testing device that measures the sulphur content in fuel in less than three minutes, providing shipowners and Port State Control (PSC) with the ability to conduct laboratory-standard testing on-site.
According to Parker Kittiwake, the XRF accurately indicates the level of sulphur in fuel by using a small fuel sample that is tested in under three minutes. Traditional methods that confirm compliance with sulphur limits, such as Bunker Delivery Notes (BDN), rely on paperwork, which increases the risk of non-compliance and heightens the chance of shipowners burning non-compliant fuel without realising. With laboratory analysis, there is also a risk that by the time the sample is analysed, the ship will have already left the port with the fuel and if found to be non-compliant it will have to be de-bunkered and compliant fuel re-bunkered, incurring significant delays and costs.
The XRF portable sulphur test kit means that non-compliant fuel can be identified while the ship is in port and prevented from being used in bunkering. PSC can ascertain compliance almost immediately, reducing the risk of a ship leaving port with non-compliant fuel.
Larry Rumbol, Marine Condition Monitoring Manager said: “Given the lack of environmental policing on the high seas, enforcement of the 2020 global sulphur cap is a daunting challenge for the industry. Efforts to develop robust enforcement solutions tend to focus on paperwork checks at ports, but this must be reinforced by accurate, reliable testing data.
Shipowners and operators are fighting an uphill battle to ensure they can effectively prove compliance. And Port State Control needs a way to ascertain compliance quickly and onsite, allowing them to take timely and appropriate action. With significant confusion over the stipulations in the way sulphur measurements are made – for example it is possible for fuel to pass ISO 4259 commercial tests but fail against MARPOL standards – it is clear that both parties require easy access to the data they need to accurately check and prove compliance.”
The XRF Analyser is factory calibrated according to the ISO 8754 standard, and is capable of conducting field measurements that correlate strongly with laboratory measurements. Fuel can be easily sampled at any stage of the bunkering process, and test results can be stored electronically, allowing operators to manage compliance audits more efficiently.
In addition to sulphur testing, the XRF Analyser can be used to measure a range of wear metals in lubricating oil, allowing operators to identify potential damage in cylinder liners, bearings, piston rings, gears, stern tubes and hydraulic systems.
XRF is integrated into a small, lightweight housing, making it easily portable for plug-and-play operation. Test results are displayed as a percentage on an LCD screen, avoiding ambiguity and mitigating the risk of human error through operators needing to interpret the test data.










