Vessel Performance Information
  • Read
    • Propulsion and future fuels
    • Operations and Management
    • Shipbuilding & Design
    • Maintenance & Continuous Improvement
    • Regulation
    • Technology
  • Subscribe for Free
  • Summit 2027
No Result
View All Result
Vessel Performance Information
  • Read
    • Propulsion and future fuels
    • Operations and Management
    • Shipbuilding & Design
    • Maintenance & Continuous Improvement
    • Regulation
    • Technology
  • Subscribe for Free
  • Summit 2027
No Result
View All Result
Vessel Performance Information
No Result
View All Result

The final countdown…the 2020 sulphur cap

fiona by fiona
December 5, 2024
in Operations and Management
0
The final countdown…the 2020 sulphur cap
Sammy Christopher Smallbone, Lawyer, Tokyo

Marine insurance firm Gard has published an article on meeting the IMO’s 2020 sulphur cap and how owners and charterers can work with their counterparties to manage the transition to low sulphur fuels. The article published below was written by Sammy Christopher Smallbone, Lawyer, Tokyo. 

The cap means that the sulphur content of fuel oil used on board commercial ships trading globally must not exceed 0.5 per cent m/m. This is a reduction from the current global limit of 3.5 per cent m/m that applies outside of designated emission control areas (ECAs). However, the 0.1 per cent sulphur limit shall continue to apply inside ECAs and for ships at berth in EU ports.

Ships can meet the 2020 sulphur cap requirement by using:

– conventional compliant fuel such as sulphur controlled distillates or residual fuel oils;

– alternative fuel types that meet the sulphur limits, such as LNG, methanol or hydrogen, some biofuels and synthetically manufactured fuel oils; or

– an equivalent means to remove sulphur oxides from post-combustion exhaust emissions, such as an exhaust gas cleaning system (EGCS), more often referred to as a “scrubber”.

To assist global implementation of the sulphur limits Regulation 14.1 of MARPOL Annex VI prohibits the carriage of non-compliant fuel oil from 1 March 2020 unless the vessel is fitted with a scrubber.

The “compliance strategy”, which is primarily a choice between stemming compliant fuel or using a scrubber, is a commercial decision for shipowners and charterers.

Ready, steady… 2020!

Owners and charterers should work with their counterparties to do some or all of the following to manage the transition to low sulphur fuels:

– Use the BIMCO 2020 clauses. The 2020 Fuel Transition Clause for Time Charter Parties and the 2020 Marine Fuel Sulphur Content Clause for Time Charter Parties were published on 10 December 2018 and provide an objectively ‘fair’ approach to apportionment of liability for some of the key issues arising out of the change in regulation.

– Prepare a Ship Implementation Plan (SIP) and carry it out. Maintain a record of its implementation onboard. IMO guidance on the  use of SIPs was approved during MEPC 73 in October 2018 and has been issued as MEPC.1/Circ.878.  As a minimum, the plan should provide guidance on

– how to segregate different fuel grades,

– how and when to carry out compatibility testing, and

– how and when to carry out tank cleaning.

– Work with your counterparty.  If your charterparty is going to straddle the 1 January 2020 deadline, begin a conversation now with your owner/charterer. Come to an agreement as to how you will handle the cleaning of tanks, and the purging of all pipework and the fuel oil service system, of all HSFO residue.

– Decide how and when tank cleaning will take place. Will it be during dry dock or whilst the vessel is in service?  If you intend to dry dock, make sure that it is booked well in advance of the 1 January 2020 deadline.

– Identify what type of compliant fuel you intend to use and begin to source reliable suppliers. Seek advice from engine manufacturers prior to ordering and using new/unfamiliar types of fuel.

– Brief the Master and crew. Make sure they are prepared for the 1 January 2020 deadline change and the processes that will need to be put in place in advance of that date. Make sure they understand the importance of the entire ship’s system being purged of any HSFO residues. Have a plan in place for any unforeseen breaches and make sure your Master and crew know what to do and how to complete any necessary paperwork, including the IMO Draft Report on Compliant Fuel Non-Availability.

The MARPOL 0.50% sulphur regulation change will come into force on 1 January 2020. This deadline will not be put back. To make sure that you are properly prepared we would encourage you to adopt some of the suggestions set out above.  MEPC 74 is scheduled to take place between 13 – 17 May, to finalise the IMO’s response to some of the still unresolved 2020 issues. A further Gard update will follow publication of the report of that meeting. In the meantime, if you require further advice or guidance, please contact your Gard representative who will be able to assist you further.

The author thanks his colleague Kristin Urdahl, senior loss prevention executive, for her assistance with the article.

View the original article here.

Tags: FuelsGardGlobal Sulphur CapRegulatory Compliance
Previous Post

ICS and shipowner trade associations agree to enhance cooperation

Next Post

ABS launches global sustainability centre to support shipping’s decarbonisation

Related Posts

Photo from Venergy Maritime.
Operations and Management

VENERGY Maritime doubles Hengli VLCC orders to four

November 9, 2026
OSM Thome’s Mary Joy Dela Cruz set out the four routines the company uses to build the people, processes and successors ashore. Photo from Digital Ship.
Operations and Management

How OSM Thome builds the shore team behind its crews amid a 39,100-officer shortfall

November 4, 2026
Photo from Synergy Marine Group.
Operations and Management

Synergy Marine adds dual-fuel LPG carrier as owners weigh long-term fuel choices

October 8, 2026
Photo from Port of Gothenburg.
Operations and Management

Stena Line’s 2031 Gothenburg terminal plan moves into design phase

October 8, 2026
Photo from Photo from HD Hyundai Heavy Industries.
Operations and Management

HD Hyundai’s lashing-free ship adds 10% deck capacity and cuts manual cargo work

October 7, 2026
Photo from One Network Express.
Operations and Management

ONE and ClassNK use vessel data to quantify roll damping on large container ships

October 6, 2026
Photo by Oleksiy Yeshtokyn,🌻🇺🇦🌻 from Pexels: https://www.pexels.com/photo/busy-shipping-port-with-container-ships-and-cranes-39362393/
Operations and Management

Laem Chabang expansion targets 18m TEU capacity as China and Thailand deepen port links

October 6, 2026
Photo from Lloyd’s Register.
Operations and Management

185,000 cbm LNG carrier design puts hybrid electric propulsion at the heart of LR, HHI and KSOE decarbonisation work

September 15, 2026
Photo from Bencros.
Operations and Management

Bencros puts 13,112 tonnes of verified CO₂ savings into marine fender procurement

August 30, 2026
Next Post
ABS launches global sustainability centre to support shipping’s decarbonisation

ABS launches global sustainability centre to support shipping’s decarbonisation

No Result
View All Result

Categories

  • Operations and Management
  • Propulsion and future fuels
  • Shipbuilding & Design
  • Technology
  • Regulation

VPO London Forum Showcase

https://vimeo.com/278105353?loop=0

vpo

Vessel Performance Info © 2024 | All Rights Reserved

More about Us

Topics We Cover

No Result
View All Result
  • Read
    • Propulsion and future fuels
    • Operations and Management
    • Shipbuilding & Design
    • Maintenance & Continuous Improvement
    • Regulation
    • Technology
  • Subscribe for Free
  • Summit 2027

© 2025 Vessel Performance Information, part of Antares Digital Group