Vessel Performance Information
  • Read
    • Propulsion and future fuels
    • Operations and Management
    • Shipbuilding & Design
    • Maintenance & Continuous Improvement
    • Regulation
    • Technology
  • Subscribe for Free
  • Summit 2027
No Result
View All Result
Vessel Performance Information
  • Read
    • Propulsion and future fuels
    • Operations and Management
    • Shipbuilding & Design
    • Maintenance & Continuous Improvement
    • Regulation
    • Technology
  • Subscribe for Free
  • Summit 2027
No Result
View All Result
Vessel Performance Information
No Result
View All Result

Jotun launches new tool to forecast carbon intensity of ship operations

fiona by fiona
May 20, 2022
in Operations and Management
0
Jotun launches new tool to forecast carbon intensity of ship operations
Figure 1. Carbon intensity factor over a 5-year drydocking period for different hull protection solutions

Jotun has developed a new digital tool that demonstrates a positive effect of hull coatings on Carbon Intensity Indicator (CII) rating and vessel efficiency.

From January 1, 2023, shipowners and operators will be required to measure and report their vessels’ carbon emissions per nautical mile. Each vessel will be rated from A to E and a vessel achieving a CII rating of D or below must prove how they are going to improve the rating to C or above to ensure compliance.

Jotun has created a tool to calculate the CII of individual vessels and project the expected development in CII ratings based on different antifouling coatings. The digital tool will display options in a way that customers can easily visualise.

Alongside the new tool, Jotun has published a paper that dispels the notion of “low friction” coatings that can improve vessel EEXI (Energy Efficiency Design Index) purely through theoretical calculations and adjustments. The findings are supported by vessel performance data analysed using the ISO 19030 standard.

The paper highlights that IMO guidelines clearly state that the effect of “low friction coatings” cannot be measured, calculated or certified in isolation. In the case of a sea trial, achieving low hull roughness requires the right surface preparation and skilled application, and not purely on choice of coating.

Should the vessel end up with an antifouling that claims “low friction” but is not effective in protecting the hull against biofouling, loss in vessel speed, increased fuel consumption and commercial consequences of poor CII ratings will be costly for the shipowner. Even as shipowners see EEXI compliance as the most pressing need, decisions taken now on hull coatings can significantly affect CII ratings for the next few years.

Hull coatings can make a difference between a B- and an E- rating on vessel’s CII.

Tan Keng Khoon, global category manager for Hull Performance, explained: “We have built a digital tool to project, for individual vessels, the expected increase over time in carbon emissions for different antifouling coatings, against progressively tightening bands of CII ratings.”

Taking a 388K dwt bulk carrier with a momentary A-rated efficiency on leaving dry-dock, the choice of antifouling for that dry-docking will lead to very different scenarios (figure 1). On a market average antifouling, the vessel’s CII rating shows an annual deterioration, falling short of its required CII by the end of the 4th year.

A premium antifouling keeps the vessel within regulatory expectations, while an ultra-premium antifouling with proactive cleaning delivers the best CII rating – much stricter requirements by the 5th year being the reason for the change from A- to B-rating.

Figure 2. Carbon Intensity correlation of 3 different sister vessels using available hull performance data

The projection is supported by evidence from 3 sister vessels with consistent operational profiles. Performance data analysed using the ISO 19030 standard for measuring hull & propeller performance and compared with fuel consumption records confirms the drastic change in CII ratings over time due to the use of lower quality antifoulings (figure 2). Biofouling growth adds significant frictional resistance to hulls, thus burning more fuel and releasing more carbon dioxide.

In figure 1, the improvements from dry-docking effect of cleaning, blasting and recoating the hull alone are insufficient to get an improvement beyond the D rating band. The vessel needs significant retrofits and further optimisations to improve its efficiency to an A rating. These can cost upwards of hundreds of thousands of dollars in equipment upgrade, or opportunity cost in reduced cargo load. With a lower quality, average antifouling, this newly-gained A-rate efficiency is only momentary. As biofouling catches hold, it deteriorates to a C by the end of the 3rd year, D by the 4th, and E by the 5th. A poor decision on antifoulings practically negates the CII improvements expected from major investments in other aspects of vessel efficiency.

Shipowners, managers and consultants need to realise that all else being equal, a vessel’s CII will increase over time due to biofouling pressure. The graph in figure 1 are upwards curves, and not flat, horizontal lines. Effective hull coatings are a requisite measure of any efficiency improvement plan, even more so when major investments will be put into retrofitting and upgrades.

Tags: Carbon Intensity IndexEnergy EfficiencyHull PerformanceJotunOperationsPaints & CoatingsRegulatory Compliance
Previous Post

Vertom to install wind-assist VentiFoil units on multiple vessels

Next Post

UK Chamber of Shipping calls for mandatory shore power

Related Posts

Photo from Venergy Maritime.
Operations and Management

VENERGY Maritime doubles Hengli VLCC orders to four

November 9, 2026
OSM Thome’s Mary Joy Dela Cruz set out the four routines the company uses to build the people, processes and successors ashore. Photo from Digital Ship.
Operations and Management

How OSM Thome builds the shore team behind its crews amid a 39,100-officer shortfall

November 4, 2026
Photo from Synergy Marine Group.
Operations and Management

Synergy Marine adds dual-fuel LPG carrier as owners weigh long-term fuel choices

October 8, 2026
Photo from Port of Gothenburg.
Operations and Management

Stena Line’s 2031 Gothenburg terminal plan moves into design phase

October 8, 2026
Photo from Photo from HD Hyundai Heavy Industries.
Operations and Management

HD Hyundai’s lashing-free ship adds 10% deck capacity and cuts manual cargo work

October 7, 2026
Photo from One Network Express.
Operations and Management

ONE and ClassNK use vessel data to quantify roll damping on large container ships

October 6, 2026
Photo by Oleksiy Yeshtokyn,🌻🇺🇦🌻 from Pexels: https://www.pexels.com/photo/busy-shipping-port-with-container-ships-and-cranes-39362393/
Operations and Management

Laem Chabang expansion targets 18m TEU capacity as China and Thailand deepen port links

October 6, 2026
Photo from Lloyd’s Register.
Operations and Management

185,000 cbm LNG carrier design puts hybrid electric propulsion at the heart of LR, HHI and KSOE decarbonisation work

September 15, 2026
Photo from Bencros.
Operations and Management

Bencros puts 13,112 tonnes of verified CO₂ savings into marine fender procurement

August 30, 2026
Next Post
UK Chamber of Shipping calls for mandatory shore power

UK Chamber of Shipping calls for mandatory shore power

No Result
View All Result

Categories

  • Operations and Management
  • Propulsion and future fuels
  • Shipbuilding & Design
  • Technology
  • Regulation

VPO London Forum Showcase

https://vimeo.com/278105353?loop=0

vpo

Vessel Performance Info © 2024 | All Rights Reserved

More about Us

Topics We Cover

No Result
View All Result
  • Read
    • Propulsion and future fuels
    • Operations and Management
    • Shipbuilding & Design
    • Maintenance & Continuous Improvement
    • Regulation
    • Technology
  • Subscribe for Free
  • Summit 2027

© 2025 Vessel Performance Information, part of Antares Digital Group